How to Boot Win­dows 10 in Safe Mode

Boot Safe Mode is vital when it comes to effectively troubleshooting Windows 10. But there’s the catch. Windows 10 boots so fast that it’s quite difficult to trigger Safe Mode with the F8 or Shift+F8 shortcuts. You can hammer away at these keys all you want, but the chances of getting them to register are pretty slim.

Boot

But don’t worry. There are multiple other methods that you can instead make use of to get your computer to boot in Safe Mode. While you are at it, your computer will not lose any data. To be on a safer side, remove third-party programs from Windows 10 startup. So without any further ado, let’s check some methods to know how to boot Windows 10 in safe mode.

1. PRESS SHIFT+RESTART

Provided that you can launch into Windows 10 normally, the easiest way to get your PC to boot in Safe Mode involves performing a simple computer restart. Hold your horses! You need to do that slightly differently than usual.

Step 1: Click the Power icon on the Start menu. Next, hold down the Shift key, and then click Restart.

Step 2: Your PC will then restart. But rather than booting you into Windows 10, you will come across a screen labeled Choose an Option. Click Troubleshoot to continue.

Step 3: On the Troubleshoot screen, select Advanced Options to proceed.

Step 4: Within the Advanced Options screen, click Startup Settings.

Step 5: Click Restart to access the Windows 10 Startup Settings menu.

Step 6: After your computer restarts and the Startup Settings menu shows up, you must press a relevant number key (4, 5, or 6) depending on how you want to activate Safe Mode.

  • Press 4 to enable Safe Mode in its most basic form (no internet or network access).
  • Press 5 to enable Safe Mode with networking (supports internet and network access).
  • Press 6 to enable Safe Mode with the Command Prompt console in place of the Windows 10 graphical user interface (for advanced users only).

After pressing the desired key, your computer will restart and boot in Safe Mode.

2. USE THE SETTINGS APP

Another convenient means to configure Windows 10 to boot in Safe Mode involves using the Recovery Options in the Settings app.

Step 1: Type recovery options into the Start menu, and then click on Open in the right pane.

Step 2: Once the Settings app finishes loading, click Restart Now underneath the Advanced Startup section.

That should restart your computer. Similar to the earlier method, click Troubleshoot > Advanced Options > Startup Settings > Restart on the menus that show up subsequently. Finally, press the relevant number (4, 5, or 6) on the Startup Settings menu to boot into Safe Mode.

3. INTERRUPT BOOT PROCESS

If Windows 10 hangs during startup and you can’t boot into the operating system at all, then you can forcibly trigger Safe Mode to load instead.

Step 1: During the boot process, press and hold the physical Power or Reset button on your computer for a few seconds until it restarts. Repeat that three times.

Step 2: After the third time, the computer will greet you with a Preparing Automatic Repair screen. Wait patiently for a few minutes.

Step 3: Once the Automatic Repair screen shows up, click Advanced Options to proceed.

Step 4: On the Choose an Options screen, click Troubleshoot.

After that navigate through Advanced Options > Startup Settings > Restart. Next, press the relevant number key (4, 5, or 6) as desired on the Startup Settings menu to boot into Safe Mode.

Related:-Should I Replace My Wooden Frame Window?

4. USE INSTALLATION MEDIA

Do you have a bootable Windows 10 installation DVD or USB flash drive at hand? If so, you can boot into Safe Mode using the Command Prompt console that comes built into Windows Setup.

Step 1: Insert or connect the bootable Windows 10 DVD or flash drive, and then restart your computer. Press any key during startup to boot from the bootable media. On the Windows Setup screen that shows up, click Next.

Step 2: On the following screen, click Repair Your Computer.

Step 3: On the Choose an Option screen, click Troubleshoot.

Step 4: On the Advanced Options screen, click Command Prompt.

Step 5: Depending on how you want Safe Mode to function, type a command from the list below into the Command Prompt console, and then press Enter:

Safe Mode

bcdedit /set {default} safeboot minimal

Safe Mode with Networking

bcdedit /set {default} safeboot network

Safe Mode with Command Prompt

bcdedit /set {default} safebootalternateshell yes

Step 6: After executing the command, exit the Command Prompt console.

Step 7: You will come across the Choose an Options screen again. This time, click Continue.

Your computer will restart and automatically boot into Safe Mode.

5. USE SYSTEM CONFIGURATION

Do you want to boot into Safe Mode repeatedly? At times, you may have to run through several diagnostics, and it’s not fun to repeatedly go through the procedures mentioned above. A simple tweak can force Safe Mode to show up on subsequent reboots as well.

Step 1: Type system configuration into the Start menu, and then press Enter. On the System Configuration dialog box that shows up, click the Boot tab.

Step 2: Check the box next to Safe Boot. Then, select either Minimal, Alternate Shell, or Network depending on how you want Safe Mode to function.

  • Minimal – Safe Mode
  • Alternate Shell – Safe Mode with Command Prompt
  • Network – Safe Mode with Networking

Finally, click Apply and OK to save the changes. The next time that you restart your computer, it will boot into Safe Mode automatically. That will repeat indefinitely until you head back into the System Configuration dialog box and uncheck the box next to Safe Boot.

Related:-How to Update Windows 10 Drivers

WHEN TO USE SAFE MODE

Safe Mode boots Windows 10 into a basic state without loading up hardware drivers, unnecessary services, or third-party startup programs. While the screen resolution leaves much to be desired, Safe Mode provides the perfect means to carry out a range of troubleshooting activities on your computer.